Sandblasting Worcester MASandblasting Worcester MA is the only blasting service you needThe process of sandblasting involves moving fine particles of an abrasive material at high speed toward a surface in order to clean it or change the finishing.
Sandblasting is often used to prepare surfaces for painting, as well as removing paint from machinery or metal surfaces. Since sandblasting is a high-velocity process, it completely removes any trace of debris, rust, coating or paints from the item. This makes the surface extremely smooth and easy to wash. Contrary to general belief, Sand is not the only material used in the process of sandblasting. Other abrasives can be used, although this mainly depends on the material they are being used on. Some of these abrasives include: • Coal Slag • Steel Grit • Dry ice • Crushed glass and so many others. When performing sandblasting, our experts always wear proper safety equipment because of the potential health risks that may sometimes be associated with the process. Some of these safety gadgets include respiratory protection mask, protective eye wear, and head protection. These are essential tools when using a sandblaster to minimize any adverse health challenge. Our sandblasters are eco-friendly and the best around Worcester to rid the surface of cars, houses, machinery, boats, and just about any surface from all sorts of pollutants. Sandblasting doesn’t have to be used just on large machines or buildings, it can also be used to clean household tools or items like old furniture, screwdrivers, wrenches, and other metal tools that have become dirty or rusty can be cleaned perfectly and efficiently using a sandblaster. Also, we use the right sandblasting method to remove tags, burs, or excessive material from metal or plastic parts of devices that may distort the shape or sometimes obstruct when assembling. Not all sandblasting uses are industrial or mechanical. Usually, most skilled artisans have been known to use sandblasters on different types of surfaces like wood, glass, metal and other surfaces to create signs or statues, and other pieces of art crafts. |
|
We Offer Fully Mobile Dustless Blasting Near Worcester MA
Sandblasting is an efficient way to clean streets, walkways, and other concrete surfaces. The sandblaster ejects abrasives which can scrub concrete and pavement floors clean very quickly, without the use of water.
With our many years of experience in both commercial and residential blast cleaning solution services, we provide professional soda blasting and high-quality powder coating services to both industrial and domestic clients.
Our prices remain very competitive, with services second to none throughout Worcester.
Whatever it is you need shot blasted or powder coated in Worcester or anywhere else within the local area, we provide just the right blast service you deserve.
We specialize in all different kinds of sandblasting services from dustless blasting, soda blasting, sponge blasting, and a myriad of other cleaning solution services tailored to suit the needs and preferences of customers.
Our blasting methods can be used to give a new finish to an item, also remove dust, paint, and deposits from brick, boat, masonry and machinery surfaces to give it a renovated and luster appearance.
These different types of sandblasting services are discussed below.
With our many years of experience in both commercial and residential blast cleaning solution services, we provide professional soda blasting and high-quality powder coating services to both industrial and domestic clients.
Our prices remain very competitive, with services second to none throughout Worcester.
Whatever it is you need shot blasted or powder coated in Worcester or anywhere else within the local area, we provide just the right blast service you deserve.
We specialize in all different kinds of sandblasting services from dustless blasting, soda blasting, sponge blasting, and a myriad of other cleaning solution services tailored to suit the needs and preferences of customers.
Our blasting methods can be used to give a new finish to an item, also remove dust, paint, and deposits from brick, boat, masonry and machinery surfaces to give it a renovated and luster appearance.
These different types of sandblasting services are discussed below.
Dustless Blasting
This method of blasting uses water to suppress dust when sandblasting. Usually, dustless blasting makes use of either a vapor blaster or a dry blast pot which has a special wet-head nozzle. The vapor blasters usually combine water and abrasive into the pressure vessel all at the same time.
The dry blast pot or non-slurry blasters combine the water and abrasive at the end of the blast hose and also use a special wet-head nozzle. Without water, it is impossible to perform dustless blasting as water is required to eliminate the dust. Since dust may pollute the air disturbing both passers-by and vehicles, this blasting method may be preferred. Slurry Systems usually require a media that sinks to flow properly.
The dry blast pot or non-slurry blasters combine the water and abrasive at the end of the blast hose and also use a special wet-head nozzle. Without water, it is impossible to perform dustless blasting as water is required to eliminate the dust. Since dust may pollute the air disturbing both passers-by and vehicles, this blasting method may be preferred. Slurry Systems usually require a media that sinks to flow properly.
Soda Blasting
The Statue of liberty was restored some decades ago by Sandblasting. It is a very mild form of abrasive blasting, much milder and less hazardous than sandblasting.
This type of blasting is the latest technology to strip off paint and clean just about any surface. The soda blaster uses compressed air to propel sodium bicarbonate based media (baking soda) unto the surface to be cleaned.
This type of blasting is the latest technology to strip off paint and clean just about any surface. The soda blaster uses compressed air to propel sodium bicarbonate based media (baking soda) unto the surface to be cleaned.
Sponge Blasting
Sponge blasting is very important as one of the most innovating and versatile methods of commercial cleaning. In a wide variety of applications, sponge Blasting can be used. For instance, when you need to remove grease and oil from appliances, sensitive machinery or strip heavy rust off a metal bin, Sponge Blasting is one of the best options for all kinds of cleaning operations. Industrial and commercial paintings alike, sponge blast for a myriad of situations which includes:
- Elastoplast coatings removal
- surface preparation
- heavy industrial/commercial coatings removal
- soft-metal cleaning
- light coatings removal
- fiberglass cleaning
- graffiti removal
- cleaning tile or masonry
- smoke & soot removal
- grease & oil removal
Media Blasting
For surface contamination, burrs, and feathered edges, impact blasting cleaning removes a broad spectrum of parts. However, in choosing the right blast media depends on the desired finish and application.
For finishing and cleaning, aluminum oxide is a sharp long-lasting abrasive used. It is known to have a fast-cutting action that minimizes damage to thin materials. It is very durable which can also be recycled many times.Also, it's a high-quality abrasive that does not dull quickly. It leaves a smooth flat, coarse-textured finish and is longer lasting and considerably more aggressive than Glass Beads. Applications Include:
• Cleaning Engine Heads
• Valves
• Pistons
• Turbine Blades
Generally, considering the larger the grit size, the faster aluminum oxide will cut.There are different variants of these processes, using various media; some are highly abrasive, whereas others are milder. The most abrasive is shot blasting with metal shot and sandblasting which uses sand.
The moderate abrasive among others are media blasting with ground-up plastic stock/walnut shells and corncobs and glass bead blasting with glass beads. Many of these substances can cause prophylactic shock to both operators and passersby. A milder type is soda blasting with baking soda.
However, in addition, there are alternatives that are non-abrasive or barely abrasive, such as ice blasting and dry ice blasting.The silica sand is usually used as a mineral abrasive. It has the tendency to break up quickly, creating large quantities of dust, which can expose the operator to a potential development of silicosis, a debilitating lung or respiratory disease.
To minimize this hazard, the silica sand for blasting is often coated with resins to control and reduce the dust. Countries like Germany, United Kingdom, Sweden, and Belgium have banned the use of Silica Sand as an abrasive. Though Silica sand is widely used as a common abrasive in other countries still not banned.
Another common mineral abrasive is Garnet, it's more expensive when compared to silica sand. This can offer equivalent production rates while producing less dust, and no safety hazards from ingesting the dust if used correctly.
Alternatively, magnesium Sulfate is often used for baking soda. In addition, Soft abrasives are used to minimize health hazards such as follows:
1) Agricultural derived abrasives: Crushed nut shells and fruit kernels are soft abrasives used to avoid damaging the underlying material especially when removing graffiti, cleaning brick or stone and the removal of coatings from printed circuit boards that are being repaired.
2) Synthetic derived abrasives: This category includes wheat or corn starch, sodium bicarbonate with dry ice used to prevent the damaging of the underlying material when cleaning the brick or stone, graffiti removal, or removing coatings from printed circuit boards that are being repaired.
For finishing and cleaning, aluminum oxide is a sharp long-lasting abrasive used. It is known to have a fast-cutting action that minimizes damage to thin materials. It is very durable which can also be recycled many times.Also, it's a high-quality abrasive that does not dull quickly. It leaves a smooth flat, coarse-textured finish and is longer lasting and considerably more aggressive than Glass Beads. Applications Include:
• Cleaning Engine Heads
• Valves
• Pistons
• Turbine Blades
Generally, considering the larger the grit size, the faster aluminum oxide will cut.There are different variants of these processes, using various media; some are highly abrasive, whereas others are milder. The most abrasive is shot blasting with metal shot and sandblasting which uses sand.
The moderate abrasive among others are media blasting with ground-up plastic stock/walnut shells and corncobs and glass bead blasting with glass beads. Many of these substances can cause prophylactic shock to both operators and passersby. A milder type is soda blasting with baking soda.
However, in addition, there are alternatives that are non-abrasive or barely abrasive, such as ice blasting and dry ice blasting.The silica sand is usually used as a mineral abrasive. It has the tendency to break up quickly, creating large quantities of dust, which can expose the operator to a potential development of silicosis, a debilitating lung or respiratory disease.
To minimize this hazard, the silica sand for blasting is often coated with resins to control and reduce the dust. Countries like Germany, United Kingdom, Sweden, and Belgium have banned the use of Silica Sand as an abrasive. Though Silica sand is widely used as a common abrasive in other countries still not banned.
Another common mineral abrasive is Garnet, it's more expensive when compared to silica sand. This can offer equivalent production rates while producing less dust, and no safety hazards from ingesting the dust if used correctly.
Alternatively, magnesium Sulfate is often used for baking soda. In addition, Soft abrasives are used to minimize health hazards such as follows:
1) Agricultural derived abrasives: Crushed nut shells and fruit kernels are soft abrasives used to avoid damaging the underlying material especially when removing graffiti, cleaning brick or stone and the removal of coatings from printed circuit boards that are being repaired.
2) Synthetic derived abrasives: This category includes wheat or corn starch, sodium bicarbonate with dry ice used to prevent the damaging of the underlying material when cleaning the brick or stone, graffiti removal, or removing coatings from printed circuit boards that are being repaired.
Safety Measures
There can be the need to regulate sandblasting because of its health hazards. It can be carried out in a controlled environment by adopting safety measures ventilation, protective clothing and breathing air supply since the safety of workers is important.
Workers health and safety is at risks when cleaning operations are carried out by using abrasive blasting specifically in portable air blasting or blast room (booth) applications. There is a large amount of dust generated through this abrasive blasting from the substrate and abrasive.
Although many abrasives used in blasting rooms are not hazardous in themselves, these include steel shot and grit, cast iron, aluminium oxide, garnet, plastic abrasive and glass bead, also other abrasives noted are copper slag, silica sand, and nickel slag have varying degrees of hazard that is typically free of silica or heavy metals.
However, in all cases, their use can present a serious danger to operators, such as burns due to projections with skin or eye lesions, falls due to walking on round shot scattered on the ground, exposure to hazardous specks of dust, heat exhaustion, creation of an explosive atmosphere, and exposure to excessive noise.
Blasting rooms and portable blaster's equipment have been adapted to these dangers. Lastly, the blasting lead-based paint can fill the air with lead particles that can be very harmful to the nervous system should be avoided or minimized with safety measures.
Workers health and safety is at risks when cleaning operations are carried out by using abrasive blasting specifically in portable air blasting or blast room (booth) applications. There is a large amount of dust generated through this abrasive blasting from the substrate and abrasive.
Although many abrasives used in blasting rooms are not hazardous in themselves, these include steel shot and grit, cast iron, aluminium oxide, garnet, plastic abrasive and glass bead, also other abrasives noted are copper slag, silica sand, and nickel slag have varying degrees of hazard that is typically free of silica or heavy metals.
However, in all cases, their use can present a serious danger to operators, such as burns due to projections with skin or eye lesions, falls due to walking on round shot scattered on the ground, exposure to hazardous specks of dust, heat exhaustion, creation of an explosive atmosphere, and exposure to excessive noise.
Blasting rooms and portable blaster's equipment have been adapted to these dangers. Lastly, the blasting lead-based paint can fill the air with lead particles that can be very harmful to the nervous system should be avoided or minimized with safety measures.